Brazil Commercial Single-User
Brazil's render engine uses the raytracing method (as opposed to scanline or hardware renderers). Raytracing has the advantage of simulating the way photons actually behave; although raytracing is not limited to realistic solutions.
Brazil's advanced raytrace engine simulates a wide range of effects including:
•Dispersion (prismatic rainbow effects)
•Sub-surface scattering (diffuse light transmitting materials such as wax or skin)
•Glossy reflections (blurry or brushed materials)
Rhino supports point, spot, directional, linear, and rectangular light objects with simple properties such as color, hotspot, and shadow casting. Brazil adds about 100 more light properties. The number of light properties can be intimidating, but most of these settings are only needed in a few specific cases.
Brazil light features include:
•Decay (darkening of light as a function of distance to the source)
•Attenuation (amplification of brightness as a function of distance to the source)
•Focus control (rectangular, conical, cylindrical etc.)
•Projections (emitting a picture or procedural texture instead of a color)
•Exclusion lists (lights ignore specified objects in the scene)
Brazil will also display focal cones and attenuation spheres for selected lights in the viewport, so you can see the affects of your settings in real-time.
Toon and NPR
Brazil includes non-photoreal (NPR) effects such as toon shaders.
(Car)Toon shaders cooperate with photoreal shaders so you can mix glass, brushed metal and toon in a single scene without losing the ability to do indirect-illumination, depth-of-field or any other effect.
You can specify the behaviour of fills and inks including:
•Multi-level paint fills (discrete colors applied based on luminosity)
•Gooch type fills, (continuous gradient)
Depth of Field
Depth-of-field (DOF) simulates the imperfect focusing properties of physical lens-systems such as biological eyes and cameras. DOF adds a measure of realism to a rendering by blurring out-of-focus areas. It can also be used to "mask" areas of the scene such as distant surroundings.
The settings for DOF include:
•Bokeh abberations (the effect over-exposed areas in an image have when they are out of focus)
Brazil supports both bitmap and procedural textures. Bitmap textures use images (a grid of colored pixels). Procedural textures, on the other hand, are defined by a mathematical function. Procedural textures do not suffer from resolution or tiling problems, and it is easy to change their behavior. Procedural textures are simulated in the Rhino viewport to make adjustments easy.
Brazil built-in functions:
Advanced definitions can be used to create other realistic materials such as wood and stone.
High Dynamic Range colors
Brazil is a high-dynamic-range (HDR) engine.
With an HDR rendering engine, colors are not limited to the black~white range. Colors can be brighter than white and darker than black. "Brighter-than-white" colors are important even though the computer screen cannot display them, because colors in a rendering are often diluted by partial reflection or refraction.
Influence of indirect lighting
Colors can also be diluted through indirect lighting. This scene is lit both directly (through a pointlight to the left, which casts the predominant shadow) and indirectly:
If the brightness of the tube is set to zero, then it will be completely black, and only the direct light emitted from the pointlight object plays a role in this scene.
The brightness of the tube has been set at half the normal brightness, meaning that the purple-to-pink gradient on the tube appears half as dark. However, there is already some indirect pink discoloration on the ground surrounding the tube.
When the brightness is set to 1.0, we see the gradient fwith a substantial amount of indirect pink, especially on the ground inside the tube walls, which is exposed from all directions. At this point, this scene is not yet HDR.
When we boost the brightness of the tube to twice its normal color, the far end of the tube (which is supposed to be pink) has been boosted so far that it becomes brighter than white. It's still pink, but too bright to be represented properly on the screen.
When we boost the brightness to a factor of five, the brighter-than-white boundary is located further towards the dark end of the gradient. Also, the indirect lighting is now predominant on the ground near the tube to the point that some of it has also breached the white barrier.
The brightness is set to one again, but the strength and saturation of the indirect lighting has been boosted. This creates a physically incorrect scene that uses the HDR features of Brazil without specifying HDR colors.
Global Illumination is a feature you will find in most modern rendering platforms including Brazil.
Global Illumination uses both direct and indirect illumination to generate a realistic image. Direct illumination is the process where light objects cast light onto objects creating bright areas on surfaces that face the light source, darker areas on surfaces that do not face the light source, and shadows when surfaces cannot "see" the light source directly due to some obstruction. After a surface has been lit directly, it emits photons and some of those photons are captured by other surfaces and some of those photons are finally caught by our eyes or a camera. The effect of indirect illumination is relatively small compared to that of direct illumination. Yet, it is very important to the "realistic" quality of the ima
Our Shipping Service & Software Downloads
TurboCAD software downloads take between 3 - 24 hours to process, once we receive the serials from IMSI, we will email you your serial no.s and links to download the software.
We offer $18 flat rate shipping anywhere in Australia with Startrack. Your order in insured against theft or damage, A signature will be required on delivery and If you are not available to take delivery Startrack will "card it" you can then collect from your local post office, or call Startrack to arrange re-delivery at a convenient time.
- ETA is 2-3 business days for NSW, VIC, QLD & ACT.
- ETA is 3-4 business days for WA, SA, NT, TAS.
We also offer Express Shipping on selected products, which will ensure your order arrives the next business day. For next business day service orders must be place before 1 PM AEST. You can see if Express Shipping is available for a particular product on the product page.
We will process your order within 24 hours of receiving it and ensure your order arrives at your door as fast as possible.
Please note we do not ship to PO Boxes or Parcel Lockers
Products may also be collected from our warehouse in Smeaton Grange (NSW). You can see if Pick-up is available for a particular product on the product page. When at the checkout please select "Pick up" as the delivery option, also ensure your best contact number is entered as we will call you when your order is ready for collection.
How we operate:
- Once you place an order with us , we will send you an Email Order Confirmation and Tax Invoice within 30 minutes.
- We will process your order within 24 hours.
- We will send a shipping confirmation Email with your order’s tracking number and a link to where it can be tracked once it has been dispatched.
- Startrack will deliver to the specified address and will require a signature for the order.
- If for any reason your order cannot be signed for, a card will be left with details allowing you to arrange another delivery time or pickup at your convenience.
- Your order is insured against loss or damage during delivery.
Digital 3D will offer you an exchange or refund and arrange free return shipping if:
- Goods are damaged or faulty through no fault of your own.
- Goods are supplied incorrectly.
- Goods vary from their description on the website.
To obtain an exchange or refund please email firstname.lastname@example.org. You will receive instructions on how to return an order, and be issued a Return Authority Number that must accompany any return.
If a customer orders the incorrect product through no fault of Digital 3D they may apply for a refund on the following terms:
- The Item is returned in perfect condition with all related packaging intact.
- The Customer accepts they will be charged a 25% restocking fee.
- Authorised Reseller that specialises in CAD Technology.
- Free returns.
- Express Shipping available.
- We are Australian owned and operated.
- Great prices.
- Fast delivery anywhere in Australia.
- Knowledgeable and friendly Customer & Tech support.
- Secure Store with SSL Encryption.
- We accept Paypal, Visa, Amex and Mastercard.